Installing an Electric Water Heater Timer

An electric water heater timer makes great financial sense. Water heaters will run all the time to keep your water hot. However, an electric water heater timer will only let the water heater run at specific times during the day. You can have it turn on in the morning for your shower and again at night for any hot water needs. There is no use in having your hot water heater running when you are not there.

Turn Off Power

Anytime you are working around an electric appliance you want to make sure it is either unplugged, or the power has been turned off. Before doing anything to the water heater, turn the power off from the circuit breaker.

Mount Timer

Place the electric water heater timer in an area both where you can reach it easily and where the wires will be able to reach the power source. The wall would be the best anchoring point. Make sure the timer is level and plumb to ensure proper timing.

Connect Wires

Make sure you are going to have enough cord and cut the power wire to the water heater. Strip back the insulation covering of the wire and connect into the timer control. The screws should be clearly marked as to where you connect the wires. Connect the other wire going towards the water heater to the screws on the timer that are marked "To Water Heater".

Increase Radiator Efficiency: 2 Tips

With the constantly rising state of gas and electricity costs in American households, it pays to know a lot about money-saving methods including familiarizing yourself with radiator efficiency. This guide will shed light on two techniques that you can use on your home's radiators in order to maximize their efficiency and minimize your electric bills!

1 - Heat Keeper Radiator Panels

Heat keeper radiator panels are fitted between the wall and your radiator and provide instant, noticeable benefits. The level of power required to heat up the radiator will decrease, whilst the efficiency of your radiator is massively amplified due to the complete heat reflection of your new radiator panels. The only drawback to this wonderful solution is the initial price of the heat keeper panels.

2 - Tin Foil Tactics

For a far more cost-effective way to increase radiator efficiency, you will require only some standard tin foil and cardboard. By covering with tin foil a sheet of cardboard the same size as the area concealed by your radiator, you will achieve a budget reflector panel that will display a surprising rise in the efficiency of your radiator. Either technique will undoubtedly help you save money in the colder months.

Is a steam radiator better for the environment than a standard radiator?

There is very little difference between a steam radiator and a standard, or hot water, radiator system. The most obvious difference is that one uses steam to heat a building while the other uses hot water. Hot water systems usually have two pipes, one for hot water to enter the radiator, and one for the cooled water to exit it. Steam radiator systems commonly use only one pipe for steam to enter the radiator and condensed steam to leave it through the single pipe, although a second pipe is sometimes used. The effect of either type of radiator system on the environment is negligible and does not differ from one type of radiator to the other.